OEM Plastic Silicone Mold Release Spray <paintable>

1.imported material 2.suitable for middle grade products 3.quick detaching 4.repeatedly use 5.SGS,RoHS,PVHS,SVHC,MSDS

BRIEFLY INTRODUCTION:

Mould Release Agents are chemical mixtures used to detach the produced polyurethane from the mould easily and without deformation. Release agents prevent soldering by making a thin film between the polyurethane system and the mould thus making easy separation possible. In general release agents can be based on wax (parafin), soap, silicon or oil. They can be applied on the mould in many different techniques but the most suitable way is the spray method. In release agent application homogenity is more important than the amount.

In order to select the most suitable release agent the type of polyurethane, compound of the mould material, surface quality and the geometry of the mould should be known. Release agents are produced by solving the releasing material in a solvent. In order to get a homogeneous solvent special equipment should be used. The optimum dosage and usage of release agents help keeping the mould cleaner and will provide better product surface finish. The optimum usage of release agents do not just provide an economical solution by preventing excessive release agent usage but also by keeping the moulds clean for longer periods extends the mould cleaning circle thus shortening the downtime and lowering the worker expenses. When a new mould is taken into production line before applying release agents mould lubricators Marbo CR 180 or CR 110 should be applied to mould to accustom the mould to production.

 

 

DESCRIPTION:

The following siliocne sprays are mould release and lubricanting agents formulated with high quality silicone polymers dispersed in a qucik drying solvent carrier. All of these products are CFC free and do not contain 1,1,1, trichloroethane.

QIKO Mould Release Agent:

1)   Oily Mould Release Agent, QQ-19

2)   Moderate Mould Release Agent, QQ-18

3)   Dry Type Mould Release Agent, QQ-17

4)   Special Dry Type Mould Release Agent, QQ-16

PAINTABLE for QQ-16/17/18, No impact on Secondary Processing, such as Oil Spraying, Silk-Screening, Electroplating, Bronzing etc.

NO-PAINTABLE for QQ-19

APPLICATIONS:

These are applied to Plastic Injection Molding Machine, suitable for use in ABS,PVC,PE,NYLON,ACRYLICS,PS,PP,PC,SAN and other plastic mould releasing. The products meets requirements of E.U. RoHS enviromental protection directive and passed Phthalates, PAHS, SVHC, SGS, 16P test.

PACKAGE:

500ml/pc, 24pcs/ctn, 900ctns/20'fcl

N.W: 400g

G.W: 300g

UN No: 1950

Dimensions of External Package: 41.5 * 28 * 23 cm³

FLAMMABILITY:

These silicone mould release agents contain flammable petroleum solvents and propellants. Do not spray near open flames or ignition source. See MSDS for more detailed info.

 

 

 

OEM Plastic Silicone Mold Release Spray <paintable>